Block Bond
This new wall plastering formula comes with numerous advantages including higher efficiency. reduced labour requirement. elimination of entire wasteful processes and ultimately lower costs. This revolutionary product requires only one coat of application, removes the requirement of waiting for the plaster to set for a week and completely does away with the requirement of a traditional application of a skim coat for Interior walls before painting. These features contribute towards significant cost savings, reduction in labour requirement. and considerable time savings for efficiency gains in construction projects.
Application Method
Superset
- Pour 3.75 litres of clean water into bucket.
- Empty entire 25kg bag of Tokyo Superset Bock Bond gradually in to the same bucket while mixing using a stirrer (rpm <500)
- Mix thoroughly for 3 mins into a smooth, workable paste.
- Allow the mixture to soak for 2 mins.
-
Then mix it again for 2 mins and apply.
if required, add in small amounts up to 0.25 ltrs of water whilst mixing till you get a smooth, spreadable paste.
- Apply a 5mm layer of block bond on clean & dry block surface with notched trowel
- Place a surface-clean block on applied block bond layer
- Use a rubber mallet to fix in place
- Use a spirit-level to check alignment
- Use Superset Block Bond within 1 hr of mixing.
- Correction time for re-alignment is up to 10 mins to ensure perfection.
- Tokyo Superset Block Bond is self-curing and does not require water-curing post application.
