Specially formulated tile adhesive to lay large format tiles. This adhesive is suitable for fixing any floor and wall tiles (6ft x 3ft or 10ft x 4ft) on new or existing tiled or cemented surfaces.
Recommended Usage
Application Method
Mixing
Pour 6.5-7 litres of clean water into bucket.
Empty entire 25kg bag of Tokyo Superbond Premium Tile Adhesive gradually in to the same bucket while mixing using a stirrer (rpm<500).
Mix thoroughly for 3-5 mins into a smooth, workable paste.
Re-mix before use "Do Not Add More Water"
Mix again for 2min.
Application
Apply 4mm layer for walls and 6mm layer for floors using a notched trowel in single direction. Apply a thin layer of tile adhesive on back of tile for internal and external wall tiling.
Spread tile adhesive which can only be tiled within 30 mins.
Press the tile firmly into wet adhesive using rubber mallet.
Leave a 3mm gap between 2 tiles.
Grout 10hrs after tiling.
Other Notes
Mix only the amount of adhesive that can be applied within 2 hours.
Not necessary to wet tile & surface before tiling.
Walk on surface 24hrs after tiling.
Recommended to fix large format tiles (3Ft x 6Ft / 4Ft x 10Ft)
DO NOT APPLY on hot surfaces (T > 28C°)
Technical Datasheet
