TOKYO SUPERBOND HIGH PERFORMANCE tile adhesive is specially formulated to result in high bonding strength. In addition to using this adhesive for fixing all types of tiles, it is highly recommended for fixing large format tiles as much as 6ft x 3ft porcelain or fully vitrified tiles on floors and walls.
This adhesive is suitable for fixing tiles on an existing tiled or cemented floor without breaking. Suitable for tiling kitchens and bathrooms where hot water is used frequently.
Recommended Usage
Application Method
Mixing
Pour 6 litres of clean water into bucket.
Empty entire 25kg bag of Tokyo Superbond gradually in to the same bucket while mixing using a stirrer (rpm<500).
Mix thoroughly for 3 mins into a smooth, workable paste.
Allow the mixture to soak for 2 mins.
Mix again for 2 mins.
if required, add in small amounts up to 1/2 litre of water whilst mixing till you get a smooth, spreadable paste
Application
Apply a 3-5mm layer of Tokyo Superbond High Performance on a clean & dry surface with a notched trowel in a single direction.
Spread the adhesive only on an area that can be tiled within 20 minutes.
Leave a 3mm gap between the tile and press firmly into wet adhesive.Clean the gaps.
Use a rubber mallet to fix tiles in place.
Grout 9hrs after tiling.
Other Notes
Use Tokyo Superbond High Performance within 2hrs of mixing.
Not necessary to wet Tiles. Clean the bonding surface with a wet sponge before tiling.
Walk on surface 24hrs after tiling.
Max recommended tile size 6ft x 3ft & less.
Technical Datasheet
